PRODUCT RELEASE BULLETIN: inDesign BMA Series Arriving this week!

The wait is over as the BMA series of amplifiers arrive in Australia for commercial installations. This Product Release Bulletin will provide you with an idea of the key features of the BMA Series.

Features of inDesign BMA Series:

  • The BMA Series comprises four models – BMA30, BMA60, BMA120, and BMA240. They all feature 4 Mic/line Inputs with Balanced XLR and Phoenix connectors and switchable line inputs between dual RCA and Phoenix
  • Channel One includes 48V phantom power as well as mute override with a variable threshold with an external (rear mounted adjustment)
  • Four mic/line inputs are switchable via XLR or phoenix connector plus line input via RCA’s
  • Preamp output and power amp input (normally linked) to facilitate the use of signal processing for graphic equalisers or tone controls on the output
  • 8 Ohm 70volt and 100volt amplifier outputs

BMA 240:

  • Output Power: 240W
  • AC Power Supply: 230VAC–240VAC
  • Output Low Impedance: 4ohm–8ohm
  • Hi Impedance Output: 70V/20ohm
    100V/41ohm
  • Input Sensitivity: Microphone Balanced XLR, 1mV
    Line RCA 500mV
  • Frequency Response: 50Hz-18KHz, +/- 2dB at -3dB Rated Power
  • Noise Floor: 8mV at 100V Output
  • THD (at -3dB Rate Power): Less than 0.5%
  • Tone Control: Bass + – 10dB, Treble + – 10dB
  • Control: Input Level, Tone Control, Master Level, VOX
  • VOX: Ch.1 has priority over Ch.2, 3, 4 (AFL)
  • Phantom Power: 48V at Ch.1 MIC XLR
  • Cooling: Fan Cooling, Thermal Control
  • Protection: Thermal protected at 95 degrees, muted input, short circuit, overload
  • Level Meter: LED Meter, range -24dB/0dB
  • Size: 2ru

BMA 120:

  • Output Power: 120W
  • AC Power Supply: 230VAC–240VAC
  • Output Low Impedance: 4ohm–8ohm
  • Hi Impedance Output: 70V/40ohm
    100V/80ohm
  • Input Sensitivity: Microphone Balanced XLR, 1mV
    Line RCA 500mV
  • Frequency Response: 50Hz-18KHz, +/- 2dB at -3dB Rated Power
  • Noise Floor: 9mV at 100V Output
  • THD (at -3dB Rate Power): 0.4%
  • Tone Control: Bass + – 10dB, Treble + – 10dB
  • Control: Input Level, Tone Control, Master Level, VOX
  • VOX: Ch.1 has priority over Ch.2, 3, 4 (AFL)
  • Phantom Power: 48V at Ch.1 MIC XLR
  • Cooling: Convectional Cooling
  • Protection: Thermal protected at 95 degrees, muted input, short circuit, overload
  • Level Meter: LED Meter, range -24dB/0dB
  • Size: 2ru

BMA 60:

  • Output Power: 60W
  • AC Power Supply: 230VAC–240VAC
  • Output Low Impedance: 4ohm–8ohm
  • Hi Impedance Output: 70V/80ohm
    100V/160ohm
  • Input Sensitivity: Microphone Balanced XLR, 1mV
    Line RCA 500mV
  • Frequency Response: 50Hz-18KHz, +/- 2dB at -3dB Rated Power
  • Noise Floor: 10mV at 100V Output
  • THD (at -3dB Rate Power): 0.22%
  • Tone Control: Bass + – 10dB, Treble + – 10dB
  • Control: Input Level, Tone Control, Master Level, VOX
  • VOX: Ch.1 has priority over Ch.2, 3, 4 (AFL)
  • Phantom Power: 48V at Ch.1 MIC XLR
  • Cooling: Convectional Cooling
  • Protection: Thermal protected at 95 degrees, muted input, short circuit, overload
  • Level Meter: LED Meter, range -24dB/0dB
  • Size: 2ru

BMA 30:

  • Output Power: 30W
  • AC Power Supply: 230VAC–240VAC
  • Output Low Impedance: 4ohm–8ohm
  • Hi Impedance Output: 70V/160ohm
    100V/320ohm
  • Input Sensitivity: Microphone Balanced XLR, 1mV
    Line RCA 500mV
  • Frequency Response: 50Hz-18KHz, +/- 2dB at -3dB Rated Power
  • Noise Floor: 8mV at 100V Output
  • THD (at -3dB Rate Power): 0.21%
  • Tone Control: Bass + – 10dB, Treble + – 10dB
  • Control: Input Level, Tone Control, Master Level, VOX
  • VOX: Ch.1 has priority over Ch.2, 3, 4 (AFL)
  • Phantom Power: 48V at Ch.1 MIC XLR
  • Cooling: Convectional Cooling
  • Protection: Thermal protected at 95 degrees, muted input, short circuit, overload
  • Level Meter: LED Meter, range -24dB/0dB
  • Size: 2ru

Further information on the full BMA Series can be found here.